Welcome to Changzhou Boye Surface Technology Co., Ltd.
0086-13901506899
 中文版
 Home > Products > Detergent > Non-ferrous metal cleaning agent series
BY-1305 low temperature aluminum die casting degreasing powder
    • BY-1305 low temperature aluminum die casting degreasing powder
Product Details

BY-1305 low temperature aluminum die casting degreasing powder

1 Introduction

For the specificity of aluminum die-casting parts, our company draws on advanced technology formulas at home and abroad, and uses degreased special degreasing powder which is scientifically compounded with weak alkali, low foaming surfactant and auxiliary agent.

2. Main features

2.1 This agent is mainly composed of weak base salts.

2.2 can simplify the process, save investment and improve work efficiency.

2.3 The use of this agent has low cost and good effect.

3. Scope of application

It is suitable for degreasing treatment of aluminum parts, zinc parts, magnesium parts and iron parts.

4. Typical process

Degreasing→washing→(rust removal→)washing→phosphating (film)→washing→washing→drying

5. Technical indicators


Serial number

Project

Indicator

1

Exterior

White →

Yellowish powder

2

PH value

9-11

3

Ratio

5%

4

Free base (F.A.L)

Working fluid 13-20

5

Operating temperature

Normal temperature -40 ° C

6

Processing time min

Dip: 10~20

Spray: 2-3

6. Preparation and adjustment

6.1 When preparing the working fluid, mix 50 kg of BY-1305 degreasing powder per ton and mix evenly.

6.2 After using the working fluid for a period of time, its degreasing function will decrease, and it should be added in time. Each ton of working fluid will increase the free alkali by a point, and need to add about 3kg of BY-1305 type. The free base is higher than the control range, and the surface reaction rate will be accelerated. After working for a period of time, it will return to normal.

6.3 When there is too much oil in the solution, the degreasing effect of the solution will decrease, and the working fluid should be considered.

7. Precautions

7.1 The workpiece after degreasing should be fully washed before being transferred to the next process.

7.2 When working, it should be tested once a day, and the agent should be added in time to ensure the effect of the working fluid.

7.3 Pay attention to salvage the oil on the liquid surface to prevent the workpiece from being stained again.

7.4 The solution is weakly alkaline and the operator should reduce contact with the skin.

8. Packaging, storage and transportation

Packed in 25kg woven bag, stored in a cool dry place.

9. Shelf life

The shelf life of this agent is half a year.

[-1-]

Inquiry Now
Name *
Phone
Email *
Message *
Verification code *
Other Products

  • Email: czboye@163.com
  • Address: No.1 Dunshangtang,Lucheng Town,Qishuyan District,Changzhou

CopyRight © -2021 Changzhou Boye Surface Technology Co., Ltd. All Rights Reserved.      Sitemap   All tags   Designed byzhonghuan Internet     
CopyRight © 2019-2021 Changzhou Boye Surface Technology Co., Ltd. all rights reserved. 
Sitemap   All tags  Designed by zhonghuan Internet     
CopyRight © -2021 Changzhou Boye Surface Technology Co., Ltd. all rights reserved. 
   Sitemap   All tags  Designed by zhonghuan Internet