BY-23 type ash remover
1 Introduction:
In the case that the putty is difficult to remove, our company draws on the advanced technology formula at home and abroad, and the BY-23 type ash remover developed by the high-quality raw materials has a major breakthrough in technology, and its ash removal effect is remarkable.
2. Main features:
2.1 The use of the ash remover has low cost and good ash removal effect on the metal surface attached to the putty.
2.2 Preparation does not choose water quality.
3. Scope of application:
Suitable for putty removal of cold rolled sheets and hot rolled sheets.
Serial number | Project | Indicator |
1 | Exterior | Yellowish Or colorless liquid |
2 | odor | odorless |
3 | Formulation concentration (%) | 20 |
4 | PH value | 1.5-2.5 |
5 | Total acidity (dot) | 70 |
6 | Free acidity (dots) | 40 |
7 | Working temperature (°C) | Normal temperature |
8 | Instructions | Impregnation |
5. Note:
5.1 Initial preparation of 1m3:
Add 200 kg of BY-23 type ash remover to the tank, add water to 1 m3, stir until completely dissolved.
5.2 Adjust 1m3:
As the bath continues to work, its total acidity will gradually decrease, and the BY-23 type ash remover should be periodically measured and supplemented.
5.3 Before the ash removal workpiece is transferred to the next process, it should be cleaned in flowing clean water.
5.4 Pay attention to salvage the oil and dirt on the liquid surface to prevent the workpiece from being contaminated again.
6. Packaging and storage:
Packed in 25kg plastic drums, stored in a cool dry place to prevent moisture.
[-1-]